INTARSIO

With Intarsio, IMPEX Color offers the possibility of covering walls, columns etc. using a system of composition with boards and panels of various sizes.

With the finishing product Marmorino Venezia Travertino, smooth Travertino and pebble dash Travertino already applied to the foundation of MDF, it is easy to create Intarsio decorations on the walls, making beautiful designs and compositions which give a unique finish to any room.

PRODUCT DATA SHEET - MARMORINO VENEZIA TRAVERTINO
The Marmorino Venezia Travertino is a mixture of particular and selectioned dusts and marble grits with other mineral ingredients with prevalence lime and other different additives which facilitate and guarantee an excellent anchorage to the support.
- Finishing: Marmorino Venezia Travertino plus water repellent siloxane protective (Silatop Coat).

APPLICATION INSTRUCTIONS
- Make sure that the wall is free of dust and grease.
- Apply a universal glue on the part of the board to be glued to the wall.
- Put the hot glue at various points and fix the board to the wall by applying slight pressure for a few seconds.
- Continue in this way until the wall is finished.

SUPPORT STANDARD MDF – E1 FOR INTERIOR
- Formaldehyde: Class A;
- Test method: "EN 120";
- Unit: mg/100g;
To be used for interiors only, where there is no humidity.

SUPPORT MDF PLAXIL – 100 EXTERIOR
- Formaldehyde: Only resins with absolutely no formaldehyde are used on the panel MDF EXTERIOR. - Test method: "EN 120";
- Unit: mg/100g;
To be used for interiors or exteriors if undercover.

EXAMPLES OF COMPOSITIONS