|
|
SANI DECOR 0,7mm - 1mm
SILOXANE-BASED FINE LIGHT PLASTER
DESCRIPTION
Suitable for giving a traditional appearance to the finish on exteriors, it is weatherproof and has the special property of permeability to water vapour.
PHOTO GALLERY
click to enlarge
|
click to enlarge
|
click to enlarge
|
click to enlarge
|
CHARECTERISTICS AND TECHNICAL DATA
- Granulometry: About 0,7 mm and 1 mm.
- Drying time: About 4 hours at the surface, complete drying after 12 - 24 hours.
- Specific weight: 1,850 gr./lt. at about 20°C
- Viscosity: Varies according to the period of storage.
- Yield: 0,7 mm = 1,5 - 2 Kg./mq. in 2 coats. - 1 mm = 1,8-2 Kg./mq.
- Application method: With inox or plastic trowel.
- Dilution: Ready to use.
- Colours: From the chart and samples made from compatible pigments.
-
Application cycle: Suitable supports are those with the properties specified above.
On a bottom with normal absorption apply a coat of SILOXANE SILCOTEX-FIXATIVE W100; on a surface with high absorption apply one or two coats of SILOXANE-SILCOTEX FIXATIVE S40.
Apply the plastic product and finish as for a normal light plaster.
- Conservation: Protect from frost and excessive heat.
- Storage: 6 / 8 months.
- Packing: 25 Kg. and 5 Kg.
|
